If you have a screen enclosure, you probably have experienced occasional “short circuits” from time to time. Sometimes the circuit malfunctions are easy to identify and fix, while others can leave a lot of damage or expensive repairs that take longer than you’d like. The first step to prevent these problems is to be sure that your screen is installed properly and securely.
The simplest way to diagnose a short on your screen is to touch the contacts on either side of the panel. A short should not cause any heat at all and a short in your screen should produce a very faint warm glow. If you find any kind of heat, it will need to be repaired. If you are able to get your eyes close to the screen, your next step will be to look for some kind of sign that will indicate that your screen has failed. Most screens will exhibit a static discharge, which is a black smoke discharge that will appear to discharge in different directions depending on where your eye is pointed.
If your screen displays an electric discharge, you will find it easier to repair the screen yourself. You will first need to get a soldering iron and make sure you’re holding it between the contacts. Next, you will need to cut off the excess wire that is attached to the screen. Once you’ve cut the excess wire, you will want to carefully reconnect the circuit to the screen itself, so that your soldering iron doesn’t burn yourself. If you find yourself with a burned soldering iron, you’ll need to use some type of electrical tape in order to cover up the area that has been burned.
Solder the remaining connections back in place. Once the soldering iron has been properly used to re-connect the circuit, you will need to take care of any heat or static that may still exist on the screen. It will be best to simply turn off the electricity in your home if there is a chance that your screen may have a short. If your screen has a problem now, the first step is to shut off the power in your house, and then turn the screen on again.
The second step to screen enclosures repair is to use a diode tester to verify that your circuit is in working order. A tester is able to detect whether or not the current is flowing when an electric current passes through the panel. When you’re dealing with a circuit that isn’t functioning, it’s often a good idea to be aware of this potential problem to avoid any unnecessary damage.
After screen enclosures repair, it is important to store your screen as far away from direct sunlight as possible. If your screen is in an area that gets direct sunlight, it may start to burn, but it is possible to store it inside a dark cabinet for several weeks until the sun goes down. If you must store it outdoors, you should take a small fan with you and put it right on top of your screen. You should also ensure that the screen is completely dry before storing it.
After the screen enclosures repair, you should always follow the instructions on the screen enclosures to ensure that your screen operates at peak performance for years to come. By following the instructions in the manual, you can ensure that your screen remains in top condition, and it will keep looking great.
Screen enclosures should never be allowed to break, and if they do, your best bet for screen repairs is to buy new ones rather than trying to repair them yourself. If the problem seems serious, you may need to contact a professional to install the enclosure, or to have your screen enclosure replaced by a reputable company that will repair it for you. By following the instructions provided in the screen enclosures manual, you will have no trouble maintaining the screen in top shape.